MKP-ANSI – Magnetic Drive Chemical Process Pump
Discover the benefits of the MKP produced by CP here – the highly safe centrifugal pump for various applications.
Find out more about our MKP pump in our animation.
Overview
Special features
- Up to 30% solids concentration and 1 mm (1/25") particle size can be pumped – depending on the nature of the particles*
Construction
- Close-coupled design
- No shaft feedthrough & leak-free
- Low product content
- Free of dead space
- No plain bearing carrier, no rotating shaft
- Single-part & central bearing, on all sizes
- Horizontal & vertical installation possible
- Low bearing forces due to hydraulically balanced impeller
- Internal & external bearing lubrication options
- High material flexibility (casing, impeller as well as plain bearing materials)
- Eddy-current-free shroud possible (=> reduced energy consumption)
- Inverted drive principle
- Single-stage centrifugal pump
Assembly & repair
- Modular system made up of few individual parts
- Assembly friendly
*In general, media with solids content can be transported, but application-specific verification in advance is necessary.
Technical data
Open all
Options
Open all
Capacities
SI: 1 to 102 m³/h
US: 1 to 450 gpm
Heads
SI: 10 to 94 m
US: 10 to 310 ft
Pressure rating
PN 16
Temperatures
SI: -100 to +250°C
US: -148 to +482°F
Kinematic viscosities
SI: 0.5 to 350 mm²/s
US: 0.5 to 350 cSt
Solids handling
Up to 30% solids concentration and 1 mm (1/25") particle size, depending on the pumped fluid*
Casing Materials
Stainless steel 1.4581 (316)
Stainless steel (e.g. 1.4306, Uranus® B6)
Duplex alloys (e.g. 1.4517)
Nickel-base alloys (e.g. Hastelloy® C-4, C-22)
Nickel (e.g. 2.4170)
Titanium alloys
Ceramic coating Al₂O₃
Working Principle
Radial flow pump
Priming Method
Flooded suction
Sealing System
Configuration types
CP's standard: Close-coupled (-148 to +482°F)
Directives
FDA 21 CFR §177
Standards
ANSI ASME B73.3
Casing
Connection flanges
EN 1092-1
ANSI/ASME B16.5
Additional connections
Casing drain (with or without flange)
External flush connection for bearing lubrication and/or flushing and cooling the magnet assembly
Manometer connection on the casing
Lantern monitoring connection
Flange connection for casing with heating chamber *
Other casing connections to meet customer needs
*Available for casing with heating chamber only
Gasket materials
PTFE
Graphite/stainless steel 1.4401
Graphite/nickel-base alloy 2.4819 (Hastelloy® C-276)
Sigma 511®/NT-CHEM-beige®
Plug seal materials
PTFE
Silver-plated nickel
Bearing Assembly
Materials
SSiC (sintered silicon carbide)
SSiC with graphite
SSiC with diamond-like coating (ADLC)
SSiC mit FuturaSafe®
Nickel-bound tungsten carbide
Nickel-bound tungsten carbide with diamond-like coating (ADLC)
Containment Shell
Materials
Stainless steel
Hastelloy® C
Titanium
Heavy-duty plastic (eliminating eddy current losses)
Zirconia ceramic (eliminating eddy current losses)
Pump Protection
Containment shell temperature monitoring
Pt100 temperature probe
Engine load sensor
Secondary Containement
Mounts
Types
Baseplate
Horizontal
Materials
Steel
Stainless steel
Stilts
Drip pan
Grounding lugs
