Additional Arrangements

CP offers pumps in horizontal, vertical, console, centre support (HT), inline or sump pump arrangements. 

Horizontal Arrangement

• Pump and motor are forming a compact unit
• Simple design, only few parts; no bearing pedestal or driver coupling required
• No maintenance of the bearing lubrication resp. driver coupling required
• Easy erection and installation, no alignement required
• Space saving
• Ideally suitable for arrangement on stilts, without foundation
• Ideally suitable for magnetic driven sealless pumps
• Due to process design the motor can be removed without opening the pump

Vertical Arrangement

• Space saving
• Provides the possibility to empty the pump completely through the suction nozzle
• No slurry sump in the pump casing
• No imbalance when starting
• Ideally suitable for slurry and melt
• Close coupled or frame mounted drive are available

Console Arrangement

• Extremely flexible arrangement possible (horizontally, vertically, lateral on a wall)
• Optimal insulation possibility at the pump
• No heat transfer from pump to baseplate by the pump casing feet
• Due to centerline support no temperature-dependent shift of the pump axle and lowest temperature-dependent piping forces
• Ideally suitable for pumping of heat transfer fluids and cooling brines
• Close coupled or frame mounted drive are available

Centre Support Arrangement (HT)

• High temperature executions allow use of magnetic driven sealless pumps at operating temperatures up to 350°C
• Ideally suited to pump heat transfer fluids
• High-temperature pumps are equipped with a build-in fan to cool the magnetic coupling and to prevent the bearing pedestal from overheating
• High-temperature pumps are constructed with a central support to compensate dimensional expansion of the pump casing caused by temperature changes
• Pump casing is executed without feet to improve insulation application

These pumps are available: MKP

Inline Arrangement

• Suction and discharge flange are arranged in one line (In-line)
• Easy erection and installation
• Space saving
• Close coupled drive, pump and motor are forming a compact unit
• Simple design, only few parts; no bearing pedestal or driver coupling required
• No maintenance of the bearing lubrication resp. driver coupling required
• On smaller pumps it is possible to line up "on the fly" without further support
• Due to process design the motor can be removed without opening the pump

Sump Pump Arrangement

• Ideally suitable for storage tanks without bottom drain
• Available as sealless magnetic driven pump or with shaft seal
• Column length up to 4 m
• Can be combined with injector to form a tank unloading system used for discharge of larger containers