MKP - Metallic magnetic drive pump

Description

Metallic construction, patented system description according to EN 22858 (ISO 2858).

Single bearing design, product lubricated. Shroud available in Hastelloy C4 or as eddy current free type.

Pump available with or without heating jacket. Horizontal and vertical installation possible. Various pump protection systems are available.

Impressing simple pump concept built up from few individual elements
Design with single bearing and central placement allows a compact construction and eliminates requirement for plain bearing bracket
Application of the product-lubricated single bearing overcomes frequent weak point of conventional pumps
Sophisticated bearing lubrication increases margins to handle difficult applications and high slurry concentrations in liquids
Optimal heat-ability of the complete inner pump room with one single integrated heating jacket

Optionally available eddy current free shrouds reduce the power requirement
Various mounting capabilities (base plate, stilt mounted, console, in-line) available for optimal space efficiency
Central bearing placement allows for vertical mounting with advantages on emptying, slurry pumping, space requirement
Vast selection of materials of construction starting from high-alloyed stainless steels, nickel and nickel basis alloys to other special alloys
Close coupled or frame mounted drive are available
Manifold accesories for different requirements available
According to EN 22858, ISO 2858

Operation Range
Capacity range (min.-max.)	0.25 m3/h up to 650 m3/h
Head range (min.-max.)	3 m up to 145 m
Nominal pressure	PN 16 standard / PN 25 optional
Temperature range (min.-max.)	-100°C up to +350°C
Kinematic viscosity (min.-max.)	0.5 mm2/s up to 350 mm2/s
Solids (max.)	Well suited because the pump chamber has minimal dead space
Casing Materials
Stainless steels	1.4581 (~316Ti) Available from stock any time, other stainless steels available from stock partially
Duplex alloys	Available from stock partially
Super Duplex alloy 255	Available from stock partially
Nickel alloys	Available from stock partially
Titanium alloys	Available from stock partially
Plastics
Ceramic	Alumina coating (optional)
Working Principle	Radial Flow Pump
Stages	Single stage
Priming mode	With branch
Shaft sealing	Magnetic drive
Arrangements
CP standard arrangement	Close coupled (-100°C up to +250°C)
EN standard arrangement	Bearing frame (-100°C up to +350°C)
Additional arrangements	Horizontal, vertical, console, centre support (HT), in-line
Standards	EN 22858 / ISO 2858, ISO 5199, ISO 15783, ANSI, ATEX, TA-Luft

Temperature monitoring	Shroud temperature monitoring, Pt100 casing temperature monitoring
Leakage monitoring	Shroud leakage monitoring
Heating / cooling	Pump casing with heating/cooling jacket, Shroud with heating jacket, Bearing pedestal oil-cooling system
Shroud materials	Metallic, additionally energy efficient, non-metallic shrouds available
Bearing materials	SSiC, additionally different bearing materials available
More options	The pump can be custom built exactly to your specific requirements with an array of other proven CP options.

Pharmaceutical and Life Sciences
Chemical
Petrochemical
Chloralkali process
Food and Beverages
Pulp and Paper
Nuclear Power generation
Oleochemicals, Sugar and Starch
Fertilizers
Oil & Gas

lang="EN-GB">Highly suitable because the pump chamber has minimal dead space

	Range Curves MKP Range Curves 50 Hz MKP Range Curves 60 Hz

	Section Drawings MKP Section Drawing 1502_1503_1505_1507_1510 MKP Section Drawing 1508_1509_150X MKP Heating Jacket

	Dimension Drawings MKP Dimensional Drawing Close Coupled MKP Dimensional Drawing Bearing Frame