MKP-Bio - Metallic magnetic drive pump, hygienic design

Description

The developed series MKP-Bio offers you an excellent solution for the aseptic application in the pharmaceutical, biotec and food industrie.

The pump has been developed and designed according to the EHEDG recommendations and takes in to account VDMA 24432 und EN 12462 standards.

Hermetically tight and dead space free pump for aseptic processes in the pharmaceutical, biotechnology and food industry
Design pressure PN 16 allows wide application range
Complies with 3A-, VDMA 24432 and EN 12462-requirements
CIP- und SIP-capable, EHEDG-tested
Pump can be dismantled without use of tools for validation purposes
Vertical arrangement makes filling and emptying possible without need for additional connections
All inside surfaces with max. Ra 0,8 roughness
Concept tolerates solid particles in pumped fluids

Optimal heat-ability of the complete inner pump room with one single integrated heating jacket
Height-adjustable pump tripod allows simple adaptation and levelling on inclinated floors
Pump support legs with damping elements allow abandonment of dampers in piping
Different suction- and discharge flange connection available
Vast selection of materials of construction starting from high-alloyed stainless steels, nickel and nickel basis alloys to other special alloys
Manifold accesories for different requirements available

Operation Range
Capacity range (min.-max.)	0.5 m3/h up to 60 m3/h
Head range (min.-max.)	5 m up to 80 m
Nominal pressure	PN 16
Temperature range (min.-max.)	-20° C up to +150°C
Kinematic viscosity (min.-max.)	0.5 mm2/s up to 350 mm2/s
Solids (max.)	Well suited because the pump chamber has no dead space
Casing Materials
Stainless steels	1.4435/1.4404 (~316L) Available from stock any time, other stainless steels available from stock partially
Duplex alloys	Available from stock partially
Super Duplex alloy 255	Available from stock partially
Nickel alloys	Available from stock partially
Titanium alloys	Available from stock partially
Plastics	-
Ceramic	-
Working Principles	Radial Flow Pump
Stages	Single stage
Priming mode	With branch
Shaft sealing	Magnetic drive
Arrangements
CP standard arrangement	Close coupled (-20° C up to +150°C)
EN Standard arrangement
Additional arrangements	Vertical
Standards	EN 12462, VDMA 24432, EHEDG

Temperature monitoring	Shroud temperature monitoring
Leakage monitoring	Shroud leakage monitoring
Heating / cooling	Pump casing with heating/cooling jacket, Shroud with heating jacket
Shroud materials	Metallic, additionally energy efficient, non-metallic shrouds available
Bearing materials	SSiC/ADLC, additionally different bearing materials available
More options	The pump can be custom built exactly to your specific requirements with an array of other proven CP options and a variety of flanges.

Pharmaceutical and Life Sciences
Chemical
Petrochemical
Chloralkali process
Food and Beverages
Pulp and Paper
Nuclear Power generation
Oleochemicals, Sugar and Starch
Fertilizers
Oil & Gas

	Range Curves MKP-Bio Range Curves 50 Hz MKP-Bio Range Curves 60 Hz

	Section Drawings MKP-Bio Section Drawing Ball Bearings MMKP-Bio Section Drawing Plain Bearings

	Dimension Drawings MKP-Bio Dimensional Drawing Angle Stand MKP-Bio Dimensional Drawing Tripod Stand MKP-Bio Dimensional Drawing Without Stool